AU $669,000 Available to order Finance
36' 1" - 11.00m
Leisure, Cruising, Racing
Vessel Location
Church Point NSW
Model Year
Hull Material

A yacht that does not meet a standard, it sets the standard.

The Saffier Se 37 Lounge is a unique concept without compromise. The SE 37 combines great sailing potential with ease of handling.

The unique position of the helmsman at the front of the cockpit is one of the key-features in the Saffier Lounge concept. At the back of the cabin the helmsperson has a cockpit of his own. Here he/she is able to oversee the complete boat and has access to all the lines to trim and control the sails. Upwind the boat will get to hull speed in the blink of an eye. Downwind the bowsprit makes it possible to sail a huge Code 0 or gennaker of over 100 m². With those sails the Saffier SE 37 Lounge will reach speeds far above its hull speed - a sensational experience!

The cockpit itself is enormous and completely free of lines, it has become a real lounge place. Fitted out with comfortable seats and luxury cushions where your family and friends can enjoy sailing the best way possible. With just one button the large integrated cockpit table lifts out of the floor with seating for ten people.

Onboard the Saffier Se 37 Lounge there is no real border between 'outside' and 'inside'. Thanks to the wide cabin entrance and a minimal level difference the transition between outside and inside is completely fluid and natural. Because of the application of carbon the main bulkhead is unnecessary. Inside the cabin is open and light, with everything you need. There is a little coffee corner, a galley, the head, luxury seats, headroom and a huge double bed in the front.

BEAM 3.45 m
WEIGHT 4800 kg

Draft 2.10 m
Ballast 2.050 kg
Mainsail 43 m²
Self-tacking jib 25 m²
Jib 108% 33 m²
Genaker 115 m²
Watertank 110 l
Fueltank 60l

ENGINE o Yanmar 2YM 20 saildrive, 21 HP with all controls and dashboard TANK CAPACITIES o Watertank; 120 liter o Waste tank; 60 liter o Dieseltank; 80 liter

BATTERIES o Engine; 1x 70 A AGM o Service; 2x 230 (total 460 A) AGM o Converter 12V - 220V Victron 50 A Shore power

PUMPS o 1x water supply o 1x waste tank o 2x Bilge pump ( manual and electric) LIGHTING (LED) o Navigation; Tricolor in top mast, engine light, two color on bow and stern light. O Saloon lights and spots for reading.

DECK HARDWARE o Harken, 2x Winches, selftacking jib track, mainsheet track. All sheets and halyards blocks Harken. O Spinlock organizers, 13x Spinlock Rope Clutch. O 2x carbon look wheels with pedastales. O Flush lewmar hatch. O 4x Folding cleats. O Railing with 6 stanchions, push and pulpit can be fitted*.

HULL Saffier yachts hulls are built using the latest high-tech construction technologies with vacuum infused Fibreglass construction with iso gelcoat and resin. Around the keel section reinforced with roving to 25 mm thickness. 6 ribs laminated in keel section to transfer forces of keel loads. Water and cove lines laminated in gelcoat.

DECK Built up according to the sandwich principle, anti-slip structure in gelcoat laminated into deck and cockpit floor. In the middle section the deck and coachroof is reinforced with a full carbon section. Deck is finished with toe rails with water drainage outlets. An anchor well is incorporated in the front deck.

COCKPIT Very spacious self draining cockpit with sufficient place for 10 persons. Two wheels for great overall view on sails, deck and surroundings. All sheets, halyards, reefing lines and kicking-strap are lead underdeck to the helmsmen and can be operated by one person at the helm by hand- or electrical winches. Cockpit is laminated with standard anti slip structure. The cockpit gives good back support, a wide seating area and sufficient depth for maximum comfortable seating. All benches and sunbathing platform can be fitted with lounge cushions*. An cockpit table* can be fitted in the cockpit floor. The aft deck can be used as a bathing platform and has easy access to the water. In the cockpit there is an integrated electric BBQ Grill* and a 40 liter fridge compartment*. There are 4 lockers for storage in the cockpit benches.

INTERIOR A open lounge interior with very comfortable seatings and finished with top quality carpentry work. The Interior lighting is with indirect led lighting* on floor and behind benches* and creates a warm atmosphere throughout. 4 integrated sliding lockers* underneath the seatings to store your belongings. A design table* can be installed of massif nutwood on portside a galley, with a integrated coffee bar*, electric induction cooker, sink with running water and a fridge* on starboard side the toilet space with toilet, sink and running water. A shower* with running water is provided. Enough lockers to store towels and personal hygiene items. 1 locker to hang out your sailing wardrobe. Color of the upholstery to your liking. Material used is the very best, such as smoked oak and nutwood for interior and floor. There are enough spots and lamps throughout the inside of the boat.

KEEL Solid antimony hardened lead L -shape bulb installed with 6x24 mm nuts and bolts. The keel provides a low centre of gravity for fast yet comfortable sailing. The vin is perfectly wing shaped to provide maximum lift and height while sailing. Total standard draft 2.10 m (a deeper keel* of 2.30 m. Is provided as an option). Lifting keels* is provided as and option.

RUDDER 1 balanced and deep rudder ( Jefa) with needle bearings for finger tip steering. The deep rudder provides excellent grip in the water keeping the boat on track when conditions are rough. Engine Yanmar 2YM 20 saildrive, 21 HP with all controls and dashboard.

NAVIGATION LIGHTS At the bow a port and starboard light, a stern light, a top light (3 colors) and a engine light.

INSTRUMENTS* A wind / speed / depth display* can be placed on the mast underneath the boom. A gps tracker* can be placed in front of the helmsmen. An autopilot* can be installed underneath deck.

TECHNICAL EQUIPMENT All valves, skin lead-throughs and ventilators are made of brass or composite. All tubes and wiring have been tested according to the ISO and CE norms.

RIGGING Fractional double spreader rig made of aluminum type Selden. The fittings and rigging are made of high quality stainless steel. Boom has been fitted with two reefs. Main rigging, lower rigging, front and rear stays are made of stainless steel wire with rigging tensioners. A flush mounted furling headstay ( Furlex) with under deck drum. A genaker* or code zero* can be used on a bowsprit. *

SAILS Made from high quality dacron that has been through a stiffening process to make the sails keep their shape and hardwearing. Mainsail comes standard with 2 reefs. ACCESSOIRES o 4x fenders, 4 mooring lines. O 2x fire extinguisher o 2x winch handle o 25 m Shore power cable

CERTIFICATION CE norm according to C or coast B with railing.

AU $669,000 Available to order    Finance   
Boat Reference
Model Year
36' 1" - 11.00m
4.8 Tonnes
Vessel Location
Church Point Nsw
New South Wales
Hull Material

Quays Marina,
1856 Pittwater Rd
City / Suburb
Church Point

  Industry Member - Buy with Confidence

We take your privacy very seriously - your contact details are never shared!