Crowther Eureka Rebuilt 2017 80% done. High deck cabin. Bargain


Price
AU $49,000 Finance
Currency
Length
34' 0" - 10.37m
Use
Leisure, Cruising
Vessel Location
Rockhampton Insurance
Year
2017
Hull Material
Fibreglass/GRP Fibreglass, basla core, glassed foam interior core.
Presentation

Crowther Eureka with full height bridge deck cabin

Potential live-aboard for a couple.
Coastal cruiser or weekender.

As is typical of the nearly completed project, you are getting a massive bargain here.
Selling because I have run out of time due to business commitments elsewhere.
The boat is afloat and well anchored.

Overall
- Full rebuild 2017. Stripped back bare hull.
- Deck has been primed and gloss coated but needs to be painted in antislip on walkway areas
- A new full height (185cm) bridge deck saloon cabin is integrated into the boat. It is constructed of epoxy laminated marine ply and external multi-layered epoxy fibreglass.
- Fantastic potential for a motivated new owner
- Includes all materials & all tools
Tools: drills, rivers, jigsaw, circ saw electrical fitting tools etc.
Materials: Wire, fittings, switches, gauges, connections, epoxy, paint, glass, etc. Etc.
- Deckware. All deck fittings are cleaned and boxed, but I would recommend replacing with new.
- Winches: Unused Andersen 40ST for mainsail and general purpose winch. Two well maintained Harken 46.2T sheet winches

Interior:
- All hatches and windows are 2016/17 new and do not leak
- All underfloor bulkheads remove and replaced throughout the boat.
- Cabin soles are new throughout the boat.
Computer designed 16mm Laser Cut ply with perfect fit hatches
The floor is screwed and glued and has polyurethane coated topsides with primed edges & underside.
- Interior below waterline cleaned, sanded and coated with Dulux Duremax GPE (General Purpose Epoxy)
- Interior bulkheads have been reinforced.
o Head new, needs to be connected

Electrical:
- The complete new electrical system installed.
- Wiring runways are built into underfloors. (Dry bilge areas)
- Incomplete - wiring to be don
- All lights, wire, (new) tools included

Exterior:
- New bridge deck cabin, full height.
- New aft deck in epoxy glassed marine ply.
- New forward decking of lightweight hardwood (more functional than net)
- Sanded & repainted full exterior with SIGMA PPG 2Pack Epoxy - Undercoatings and SIGMA PPG 2Pack PolyUrethane Gloss finish.
- All new coated galvanised cleats. All with raised (leakproof) fibreglass deck baseplates & hardwood under deck reinforcements. Stainless steel & Butyl Tape installation.
- All new heavy duty stainless steel full height (750mm) stanchions & bases. All with raised (leakproof) fibreglass deck baseplates & 12mm ply under deck reinforcements. Stainless steel & Butyl Tape installation.
- All new aluminium hatches set on raised leakproof bases. Stainless steel & Butyl Tape installation.
- 4 x  500x500 hatches. 3 x 400x400 hatches.
- Deck has been primed and gloss coated but needs to be painted in antislip on walkway areas

Other Awesome stuff:
- All new TruDesign Nylon/Composite through-hull fittings and seacocks perfectly set in Epoxy glue. The through hull fittings are installed in sealed rear compartments as a safety precaution
- Sewage: Gravity release blackwater tank 60litres with bypass
- MAXWELL HRC8 Windlass set on a raised leakproof pad. (New 2017)
- 77m. X 8mm Shortlink Galvanised Chain (Blackwoods) (New 2017)
- SARCA EXCEL 22kg Anchor - a very serious anchor for a boat of this size (New 2015 - hardly used)
- 560Ah worth of batteries! 2 x 280AH 12V Eclipse AGM Deep Cycle Battery (new 2017)
Installed in a purpose-built battery box under the floor. Opposite side of the boat to water tanks. Same weight.
- Solar Panels: 400W system: 4 x 100W Mono Solar Panels (New 2017)
- Power Inverter: Pure Sine Wave 2500W 5000W12V-240V (New 2017, not connected)

---------------
What needs to be done:
Materials and tools included already here:
Paint antiskid on decks
Attach sail fittings: track, cleats, leads etc.
Build a simple kitchen/galley
Connect water system
Connect wastewater system
Finish wiring
Attach stanchions
Fit kitchen sink (double sink)
---------------
What needs to be bought, and installed or built:
Buy and install lifeline wring
Buy and install EV100 Autopilot
Build bedframes (matrasses included)
Some shelving


Price
AU $49,000    Finance    Insurance
Vessel Name
Naga
Year
2017
Length
34' 0" - 10.37m
Beam
5.3m
Draft
1m
Displacement
4400kg
Vessel Location
Rockhampton
Region
Queensland
Designer
Lock Crowther
Hull Material
Fibreglass/GRP Fibreglass, basla core, glassed foam interior core.
Decks Material
Glassed Marine Ply
Engine Make
Yamaha
Number Engines
2
Horsepower
9.9
Fuel Type
Petrol
Max Speed
7kts
Cruise Speed
5kts
Fuel
83 litres
Water
160 litres - in hull tank
Dinghy
Small Inflateble 2.3m & Surf Rescue 3m Dinghy (hard flloor, big red one)
Outboard
3.5 Tohatsu 4 Stroke
Accommodation
Clean but incomplete:
2 double bed berths
Cabins
Port: 1. Forward storage 2. Sleeping cabin/berths with space for storage & double bed 3. Main section galley/kitchen 4. Rear cabin (water maker, freezer space etc) 5. Rear storage compartment (fuel only)
Starbord: 1. Forward storage 2. Sleeping cabin/berths with space for storage & double bed 3. Main section nav/office/workshop 4. Head, shower, basin etc (full height, perfect draiange into sump) 5. Rear storage compartment (blackwater tank + small genset)
Berths
2 x Double Bed sized berths
Shower
Incomplete
Toilet
DMC Electric Toilet (New, Unused) - All fittings in place, not connected.
Entertainment
Finishing off the boat!!!
Galley
No galley installed as yet.
Water-Maker
VR-500L. New, in boat, not installed. All fttings & connections. New seacocks in place.
Ground Tackle
MAXWELL HRC8 (New 2017)
77m. X 8mm Shortlink Galvanised Chain (Blackwoods)
SARCA EXCEL 22kg Anchor with heavy duty galvanised rated shackles and swivel.
Bilge Pumps
4 x TMC Auto Pumps 3750L/H - 1000GPH (each) 12V 4.5A - Forward, aft, both hulls. 3-way switches
Epirb
Out of date
Life Jackets
Approx 4-6
Flares
Out of date
Fire Protection
Out of date (3)
Electrics
560Ah System: 2 x 280AH 12V Eclipse AGM Deep Cycle Battery (new 2017)
Installed in purpose built battery box under floor. Opposite side of boat to water tanks. Same weight.
400W system: 4 x 100W Mono Solar Panels (New 2017)
LCD Charge Manager
Power Inverter: Pure Sine Wave 2500W 5000W12V-240V (New 2017, not connected)
Electronics / Navigation
Garmin echoMAP 55dv Combo with hull fitted Transducer (Operational, New 2017)
Sail Inventory
Sails were new in 2011 but do not appear to have ever been used.
Fully battened mainsail with Lazy Jacks, sailbag and zips
Self furling jib
Mast / Rigging
Aluminium mast
Mast climbing steps ( I have not tested them)
Deck Gear
2 x Harken 46.2st - Two Speed Self-Tailing Winch - circa 2007, ex racing boat, well maintained and in good condition
1 x Andersen 40ST (new 2015, never used)
Winches not installed.
Raised re-inforced pads in place for winches to bolt into.
Remarks
Potential live-aboard for couple.
Coastal cruiser or weekender.

CONTACT DETAILS
Name
MICHAEL PITT
Telephone
City / Suburb
MAROUBRA
State
NSW
Country
Australia


EMAIL THE SELLER FOR MORE INFORMATION
We take your privacy very seriously - your details are never shared!