Brewer Alaska 43


Price
AU $290,000 Now reduced Finance
Currency
Length
42' 10" - 13.06m
Vessel Location
Cammeray Marina, Cammeray NSW. Insurance
Launch Year
2015
Hull Material
Steel Please refer to general remarks for full Hull Material.

Kaivita is a 2015 Alaska 43 now exclusively for sale with YOTI on Pittwater.

Launched in July 2015 in Ballina NSW after a 6-year build at the Ballina boatyard, Kaivita is a custom-built heavy displacement cruising yacht from the drawing table of world renowned yacht designer, Ted Brewer, from Canada.

The owner wanted a steel yacht with huge range under power and with a comfortable and easily managed sailing ability. Ted Brewer is very well known for his highly seaworthy designs and the "small ship" style of this vessel is what caught the eye of the owner. Such is the range of this vessel she can go from Sydney to Auckland under power alone.

Kaivita has a beautiful light filled interior. She is a Two Cabin layout with four bunks in the forward V-Berth and a large double berth owners' cabin aft with a separate office nook. The timbers used throughout are Celery Top pine trim and planking all varnished. The floor is Jarrah. All main surfaces are faired, corners coved and painted with 2 pack paint finish. Every piece of plywood used in the fit out was first edge saturated in Epoxy wood preserver and then painted with 2 coats of epoxy before being fitted into the boat.

The engine is a keel cooled marinized Isuzu 4JB1 - naturally aspirated making her easy to source parts, simple to service, reliable and highly fuel efficient.
The galley has a high quality Force 10 stainless steel gas stove and oven fitted. The refrigeration is from Ozefridge and is built in under the bench and runs off 12 volt or 240 volts.

She comes with B&G chartplotter, Simrad sounder and log, Simrad wind display, Coursemaster autopilot and is fitted with AIS.

If you would like to find out more about Kaivita or to arrange an inspection, please contact YOTI on info@yoti. Com. Au or (02) 9960 6222.


Price
AU $290,000 Now reduced    Finance    Insurance
Vessel Name
Kaivita
Boat Reference
Kaivita
Launch Year
2015
Length
42' 10" - 13.06m
Beam
3.93 m
Draft
1.67 m
Displacement
18,000 kg
Keel / Ballast
Full keel - Stern cutaway refer design drawings.
Vessel Location
Cammeray Marina, Cammeray Nsw.
Region
New South Wales
Designer
Ted Brewer
Builder
Julian Reynolds, Barry Kean, Mitchell Phillips.
Hull Material
Steel Please refer to general remarks for full Hull Material.
Decks Material
Please refer to general remarks for full Decks Material.
Engine
Model - 4JB1 - Naturally aspirated, keel cooled, water cooled exhaust. Engine Room. Hydraulic steering. Dual clear bowl racor fuel filters. Easily accessible, easily monitored. The Isuzu 4JB1 was marinized by Zenith Engineering in Brisbane. It is a very common engine manufactured in huge quantities globally with parts easily accessible anywhere in the world. Separate equipment space under pilothouse floor, engine room accessible on 4 sides with opening doors.
Engine Make
Isuzu
Number Engines
1
Horsepower
70 hp
Engine Hours
110 hrs Approx.
Propulsion
Bronze 3 blade propeller.
Fuel
1,600 litres - Steel tank.
Water
1,000 litres - Steel tank coated in 2 pack food grade epoxy.
Dinghy
Achilles inflatable (New 2018).
Outboard
Johnson 8 hp 2 stroke - Excellent condition.
Cabins
2 Cabins.
Berths
6
Shower
1 x separate in the head area.
Toilet
1 Lavac Vacume with electric pump/ macerator.
Air-Con
Diesel Heater.
Galley
Diesel cabin heater in Saloon by Dickonsen Canada. Stainless Steel double basin.
Refrigeration
12 volt/ 240 volt on shore power built into galley bench.
Stove
Force Ten Stainless gas 3 burner and oven.
Hot Water
Pressure water system, 50 litre heater engine heat exchange or 240 volt when on shore power.
Ground Tackle
Ground Tackle - 80 mtrs, 10 mm chain. Anchor/ Winch - 1 Rocna type - Muir 12 Volt Winch.
Safety Gear
Life jackets, flares. Ocean Safety 6 person Life Raft.
Bilge Pumps
3 electric plus one manual emergency.
Epirb
Epirb.
Electrics
All LED interior lights. LED navigation lights. 2000W inverter plus shore power connection and 240 volt wiring and several power points around the boat. 160 watts of solar panels mounted on rear frame.
Batteries - AGM new in 2015, separate start battery - 5 x 80 amp house batteries.
Electronics / Navigation
Sounder / log - Simrad. Wind Inst - Simrad. Auto Pilot - Course master. AIS fitted.
GPS - B&G Chart plotter.
Radio - ICOM VHF with DSC.
Sail Inventory
Mains - Evolution main with lazy jacks on and boom bag. 1 x Genoa. 1 x Jib. 2 x Furler. Sails by Evolution sails on Gold Coast - Brand new in 2015 in excellent condition.
Mast / Rigging
Cutter rig - twin headsails on furlers. Alloy mast and boom. Stainless Steel Wire rigging.
Deck Gear
Anderson Stainless winches x 4 new in 2015. Mainly Ronstan deck fittings
Remarks
Detailed Hull Material - Steel - fully blasted and painted inside and out with high quality 2 pack finish. Inside surfaces from the overhead down to waterline were sprayed with 2 inches of 2 pack insulating foam to both insulate the vessel and protect the hull from condensation. This approach creates a hull that will last a lifetime.

Detailed Deck Material - Steel hull and deck, deck box lids and main deckhouse hatch all teak. Deckhouse windows fabricated to size in NZ out of 10 mm toughened safety glass built super strong for safety. Port windows all heavily cast in 316 stainless and toughened glass. Bollards all 316 stainless welded to the hull. Chainplates all 316 stainless welded to the hull. Strongest possible hull construction.

Steel dinghy davits on sterm heavy duty construction.

Last hauled and antifouled January 2019 - Done annually as well as anodes replaced as required.

CONTACT DETAILS
Dealer
Yoti
Telephone
Address
The Quays Marina,
1856 Pittwater Road
City / Suburb
Church Point
State
NSW
Country
Australia
Website


EMAIL THE SELLER FOR MORE INFORMATION
We take your privacy very seriously - your contact details are never shared!
MORE BOATS FROM YOTI