2013 J Boats J/111
Length
36' 1" - 11.00m
Model Year
2013
Hull Material
Balsa core/biaxial E-glass vacuum infused hull laminate
The J/111 is a sleek, speedy, one-design 36 footer that is the ultimate day sailing, racing and weekend cruising sailboat. J/111 is an easy-to-handle, comfortable sailboat that accelerates quickly, slices to windward at 7+ knots and hits double-digit speeds downwind. A global success story from JBoats - punching way above its size in regattas in Australia, Europe and USA.
Model Year
2013
Length
36' 1" - 11.00m
Beam
3.29m
Draft
2.20m
Displacement
4000kg
Keel / Ballast
High aspect two-metal racing keel with lead bulb and stainless fin - 1570kg
Designer
J/Boats
Hull Material
Balsa core/biaxial E-glass vacuum infused hull laminate
Decks Material
Corecell/biaxial E-glass deck laminate
Engine
Yanmar 3YM20 3 cylinder 4-stroke 21hp diesel engine with 60 amp alternator and SD 20 saildrive with 2-piece split zinc
Fuel
50L diesel
Accommodation
Large double V-berth with cushions. Settee berths to port and starboard with cushions & backrests. Double quarter berths aft. Fwd facing nav station.
Toilet
Marine toilet with holding tank
Galley
L-shaped galley, icebox with 12v refrigeration unit, 2-burner gas stove with oven, sink with drain, pressurized fresh water, storage cupboard and lockers.
Electrics
1 AGM battery 100Ah & 1 engine battery 70AH with switches and double diode/circuit breaker
Mast / Rigging
Hall Spars 152c autoclaved carbon fibre mast with double set of tapered aluminum spreaders, backstay crane, flush shroud terminations. Nitronic 50 discontinuous rod standing rigging package including shrouds and forestay. Ronstan calibrated shroud turnbuckles. Dyneema DSK-78 backstay. Low-profile Facnor “Flat” headsail furling system. Carbon fibre, retractable bow sprit.
Running rigging package w/Crystalyne Vectran Main & Jib Halyards with Tylaska shackles, Endura Braid Dyneema core jib & main sheets. DSK 75 tapered spin halyard, Maxibraid tapered spin sheets with T-8 shackle. Also includes reef line, cunningham, pole control, tack line, inhauler lines, traveler control lines, mainsheet strop and mainsheet fine tune. Hall Quikvang with integral cleating.
Running rigging package w/Crystalyne Vectran Main & Jib Halyards with Tylaska shackles, Endura Braid Dyneema core jib & main sheets. DSK 75 tapered spin halyard, Maxibraid tapered spin sheets with T-8 shackle. Also includes reef line, cunningham, pole control, tack line, inhauler lines, traveler control lines, mainsheet strop and mainsheet fine tune. Hall Quikvang with integral cleating.
Deck Gear
46:1 Harken STP Performa self-tailing primary winches. 40:1 Harken STP Performa self-tailing cabin top winches. 2 x10” Lewmar One-touch winch handles. Two-speed Harken Mainsheet System with 6:1 rough tune purchase to swivel cam base & 24:1 fine tune purchase led to centreline ratchet cam. 4:1 Harken Traveler System – led P&S. 6:1 Harken Adjustable Jib Lead System. Jib in-hauler hardware & 4:1 tackle P&S. 6:1 Cunningham system.
Harken 57mm Airblocks for spinnaker sheet and tack line. Harken bow-sprit control system led internally to cockpit mounted cam cleat. Harken mast base halyard blocks and Spinlock 4-sheave organizers P&S. Spinlock XTS halyard & tack line rope clutches. Custom SS mast collar with pins for halyard blocks and halyard bale. Stainless cabin top handrails P&S.
Tapered lifeline stanchions. Double lifelines to meet ORC offshore regulations with 9” lower lifeline height. Custom bow pulpit and dual corner stern rails with LED navigation lights. Four 8” 4-bolt SS mooring cleats. Four SS padeyes for cockpit spinnaker blocks. Interior ventilation from two framed opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth. Acrylic offshore drop-board with key lock and inside operable latch/unlatch. Cockpit operated manual bilge pump. Custom SS stemhead, shroud and backstay chainplates.
Harken 57mm Airblocks for spinnaker sheet and tack line. Harken bow-sprit control system led internally to cockpit mounted cam cleat. Harken mast base halyard blocks and Spinlock 4-sheave organizers P&S. Spinlock XTS halyard & tack line rope clutches. Custom SS mast collar with pins for halyard blocks and halyard bale. Stainless cabin top handrails P&S.
Tapered lifeline stanchions. Double lifelines to meet ORC offshore regulations with 9” lower lifeline height. Custom bow pulpit and dual corner stern rails with LED navigation lights. Four 8” 4-bolt SS mooring cleats. Four SS padeyes for cockpit spinnaker blocks. Interior ventilation from two framed opening ports in sides of cabin trunk and offshore style forward skylight deck hatch above V-berth. Acrylic offshore drop-board with key lock and inside operable latch/unlatch. Cockpit operated manual bilge pump. Custom SS stemhead, shroud and backstay chainplates.