NEW Island Inflatables Island Wood Floor 430 - Welded PVC

IW430 - 4.3M ISLAND INFLATABLE BOAT

WOOD Floor

Grey Trimming

The 4.3m Island Inflatable Boat with WOOD Floor is largest boat in the Island Inflatable range. Due to is massive size and roomy inner space. This model is extremely popular with Scuba Divers /Spear Fisherman.

Island Inflatable boats are Australian designed using the lastest "High Frequencey Thermo Welding" (HFTW) technics on all seams for durability against Australia's harsh conditions. You'll never have a Island Inflatable seam come apart due to heat or hot days due to HFTW.

It's not only our manufacturing processes which makes Island Inflatables the #1 selling privately owned brand in Australia. It's our unique features and attention to detail. Firstly all our boats are designed by "Island Inflatables". Most brands you see online and in-store are boats purchased at trade fairs with brand names then placed on them.

Lets start with our materials. Island Inflatables use the heaviest grade of PVC material possible before going into the commercial grades used in the armed forces etc. Our grade is 1100 D-teck Denier / 0.9mm thickness.

All out tubes sizes are oversized. This makes for a nicer riding boat. It's more comfortable to be sitting on the side of a inflatable with larger tubes. It also creates a much drier ride.

Island Inflatable transoms are constructed with marine ply coated with epoxy coating, rubber sealing on top. A Internal and External outboard mounting plate. As well as a 1 way bung which allows you to remove the bung and drive the boat to remove any excess water under the floor.

A good way to see if a inflatable boat is a quality inflatable boat is by the tow rings located at the front of the boat. Island Inflatable boats use a large heavy duty Stainless Steel tow ring. Mounted on a equally large and reinforced mounting patch. Lesser quality boats will always use a smaller ring and patch with no reinforcing.

Island Inflatable Boats pay special attention to wear and tear. We use non-marking rubbing / wear strips around the side and under the keel.

All Island Inflatables come standard with a over-inflatation valve. Fitted to help with hotter days and increased air pressure.

On the underside of each oversized tube we apply a 2nd layer of PVC material. This helps when dragging or launching your inflatable off a beach. It gives that extra layer of protection from any hidden rocks / shells etc.

Island Inflatables off set the grab / safety rope to the side of the tube instead of the top. This is so when sitting on the tubes your not sitting on a uncomfortable rope.

Whats stands out most with the Island inflatable boats is the unique and very useful Internal Rear Carry Handles. This was our first desgin feature we come up with. As having the handles on the outside rear tubes makes it impossible for 1 people to carry the boat. Also the handles are made from a much harder material which can easily scratch your cruiser / yacht. So it made perfect sense to move the handles from the outside of the rear tubes to the inside.

Lastly the look/aesthetics of our Island Inflatable boats. Once again so much thought has been put into the colour schemes. You'll find models from 2m upto 2.9m are white and black. This is because in this size the main use is for tenders to larger cruisers / yachts. We want out Island Inflatables to compliment your pride and joy by blending in not standing out while floating off the back of your boat. The 3.3m up to 4.3m models are more day boats. We use a light grey colour so they hide and dirty marks easier plus the colour isnt dark enough to attract the heat of the sun and make it uncomfortable for you to sit on.

SPECIFICATIONS:

Overall length: 4.3m / 14ft
Inside length: 280cm
Overall width: 205cm
Inside width: 105cm
Tube diameter: 50cm
Chambers: 3 + Floor + Keel
Person capacity: 7 Persons
Cargo capacity: 830kg
Max motor power: 40hp / 29.4kw
Boat weight (Boat/Floor/Oars): 75kg
Floor options: WOOD Floor

Material: Heavy Duty 1100 D-Teck denier polyester coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
WOOD Floor: Aluminium Sectional Marine plywood with expoxt coatings
Inflatable keel
Double layer of PVC mateerial on underside of tubes
6 Carry handles
Combination Front Carry handle Bow ring with mooring rope
2 Heavy Duty Stainless steel tow rings with extra reinforcing
Non-marking all round rubbing strakes.
Off-set Safety / Grab ropes
24mm thick marine grade transom with rubber capping
Inside / Outside motor plates
Self bailing one way bung / drain plug
Over inflatation valve
2 Internally sealed bulkheads to equalize tube pressures
STANDARD EQUIPMENT:

Dual Action Hand Pump.
Carry Bag
Set of Oars
Repair kit

Available at Rubber Ducky Doctor in Adelaide.

Rubber Ducky doctor is an inflatable boat RIB specialist with a complete inflatable specific showroom, workshop and hard stand offering all types of inflatable boats and inflatable boat accessories.

Call today on Call Seller