Viper Pro S/S 1000 MICRO Winch 66mtr DB Kit

The Viper S-series Micro Winch features an all-stainless steel construction, including a 316-grade stainless steel gearbox. Designed to fit into bow riders, tinnies, walk-arounds, bass boats, and any boat with restricted anchor well space or even none at all.

It includes a 1000-watt electric motor made from hand-polished 316 stainless steel and rotates its drum at speeds of up to 40 meters per minute (fall rate), ensuring you get onto your GPS mark each and every time!

It has more torque than a conventional drum winch, three support bearings hugging a one-piece solid shaft, and a welded housing bracket that closes up the gap between your drum to prevent rope jams.

Constructed from 8-mm-plate 316 marine-grade stainless steel and comes standard with a life-time warranty against water intrusion plus a five-year Viper performance warranty.

The Micro Winch is bundled with everything needed, including a 5mm stainless steel sandwich plate, stainless steel bolts, screws, nylocs, washers, two face plates, rope, chain, and swivel. All you have to add is your own cabling or one of the Bell Marine tinned copper marine wiring looms, and you will never have to break your back pulling up your anchor and chain again!

Please note: 1 meter of 3B&S cables is already attached to the motor and leak-tested, so there is no need to remove end caps that are not sealed properly.

Features:

28mm stainless steel shaft with three support bearings
316-grade polished stainless steel plate
Powder-coated aluminum worm drive gear box
3600 motor rotations, 16 different positions
Max fall rate: 40 metres per minute
Max retrieval rate: 36 metres per minute
Suit vessel length: 4 to 8 meters
Max load: 180 kg
Weight: 13kgs
The kit bundle includes:

1x Viper Pro Series II 1000 Micro Winch
Choice of rope kit:
60m x 6mm Double Braid Premium rope
100m x 4mm 12 Plait Uhmwpe Hi-Spec 3000 rope
6m x 6mm Galvanized short-link anchor chain
Hi-Spec rope kit also includes: 10m of 8mm 3-strand polyester shock cord spiced at both ends
1x Viper pro series anchor swivel, small
1x Viper deluxe anchor Roller, Small
1 meter of B&S tinned copper cable fitted and leak-tested
200-amp reversing solenoid
LED-illuminated marine rocker switch
Viper laser-etched LED-illuminated switch cover
100-amp flush-mount circuit breaker with rubber seal
Single LED switch stainless steel face plate
Combo led switch and circuit breaker s/s face plate
5mm stainless steel sandwich plate
All fixing hardware
Installation notes and wiring diagram


JPW SKU Rope Shock Cord Chain
JPW12852 60m x 6mm
Double Braid Premium - none - 6m x 6mm
Galvanised Short Link
JPW12855 100m x 4mm
Hi-Spec 3000 10m x 8mm
3 Strand Polyester 6m x 6mm
Galvanised Short Link

Dealer Website /viper-s-series-micro-drum-anchor-wi nch-bundle