15m Commercial Workboat "TAWE"
Currency
Length
51' 5" - 15.67m
Vessel Location
Prince of Wales Bay Marina (end of "B" Arm)
Launch Year
1967 approximate
Hull Material
Steel Topsides spray painted by contractor in Wattyl 2 pack. Bottom antifouled.
"TAWE" is a rugged 15m Steel TUG / WORK BOAT. A very handy workhorse. Such smaller, 'ready-to-work' TUGS / WORK BOATS are hard to find, especially one that has undergone such a MAJOR REFIT (see below).
"TAWE" is certified in Survey Class 2C (2 crew + 2 passengers) UVI 446878, COS-32838-002. Inclination tests have been completed and a new stability book has been produced by Kedge Marine Surveyors. Bollard Pull - 4.8 Tonnes tow.
.................................... ...................................... ...................................... ...................................... ..
This VESSEL (TUG / WORK BOAT) "TAWE" (UVI 446878) is offered for SALE by PUBLIC TENDER on behalf of the Vendor.
Location: Prince of Wales Bay Marina (end of "B" Arm)
Inspections: The VESSEL will be open for inspections between 12 to 2 pm on Wednesday 17th July, Wednesday 24th July, Saturday 27th July and Wednesday 31st July (four inspections).
TENDERS CLOSE Thursday August 1st At 3.30 pm AEST. Late Tenders will not be considered. Only TENDERS over $120,000 Will be considered
TENDER Instructions and OFFER sheets are available as follows...
*at the office of Boat Sales Tasmania at the Royal Yacht Club of Tasmania, Marieville Esplanade, Sandy Bay,
*on board the VESSEL on Inspection Days.
*online at Boat Sales Tasmania website
* by mail.
Summary of works completed includes...
- Inclining test, lead ingot ballast added and new stability book produced by Kedge Marine Surveyors
- Firepro fixed firefighting system fitted
- Overhauled steering hydraulics with new rams and tiller
- New TMQ AP4 autopilot
- Cut out and replaced bad shell plating in hold and tiller flat; sandblasting and paint in these and chain locker
- Prop shaft skimmed, new white-metal bearings and shaft seals fitted
- Main engine serviced; heat exchanger and raw water pump fully overhauled
- DC electrical system fully rewired; new start, house and radio batteries
- Hydraulics connected to the main engine and anchor winch fully overhauled
- 2x new anchor chains and anchors
- New engine-driven Jabsco bilge/fire pump
- Relining of wheelhouse 80% complete, inc. New dash and access stairs
- New sliding wheelhouse doors
- New aluminium watertight rear door
- 2x new direct-glazed back wheelhouse windows
- New quick-release tow hook
- Heavy duty tyres for fendering installed all round
- Full external paint job completed August 2022. Spray painted by a contractor in Wattyl 2 pack on all topsides, antifoul
and Propspeed on the propeller
- toilet and aft entrance area refurbished
*** A comprehensive inventory list can be supplied on request ***
DOWNLOAD THE TENDER OFFER DOC WITH INSTRUCTIONS BELOW.
CALL MATTHEW on or PAUL on for further information
"TAWE" is certified in Survey Class 2C (2 crew + 2 passengers) UVI 446878, COS-32838-002. Inclination tests have been completed and a new stability book has been produced by Kedge Marine Surveyors. Bollard Pull - 4.8 Tonnes tow.
.................................... ...................................... ...................................... ...................................... ..
This VESSEL (TUG / WORK BOAT) "TAWE" (UVI 446878) is offered for SALE by PUBLIC TENDER on behalf of the Vendor.
Location: Prince of Wales Bay Marina (end of "B" Arm)
Inspections: The VESSEL will be open for inspections between 12 to 2 pm on Wednesday 17th July, Wednesday 24th July, Saturday 27th July and Wednesday 31st July (four inspections).
TENDERS CLOSE Thursday August 1st At 3.30 pm AEST. Late Tenders will not be considered. Only TENDERS over $120,000 Will be considered
TENDER Instructions and OFFER sheets are available as follows...
*at the office of Boat Sales Tasmania at the Royal Yacht Club of Tasmania, Marieville Esplanade, Sandy Bay,
*on board the VESSEL on Inspection Days.
*online at Boat Sales Tasmania website
* by mail.
Summary of works completed includes...
- Inclining test, lead ingot ballast added and new stability book produced by Kedge Marine Surveyors
- Firepro fixed firefighting system fitted
- Overhauled steering hydraulics with new rams and tiller
- New TMQ AP4 autopilot
- Cut out and replaced bad shell plating in hold and tiller flat; sandblasting and paint in these and chain locker
- Prop shaft skimmed, new white-metal bearings and shaft seals fitted
- Main engine serviced; heat exchanger and raw water pump fully overhauled
- DC electrical system fully rewired; new start, house and radio batteries
- Hydraulics connected to the main engine and anchor winch fully overhauled
- 2x new anchor chains and anchors
- New engine-driven Jabsco bilge/fire pump
- Relining of wheelhouse 80% complete, inc. New dash and access stairs
- New sliding wheelhouse doors
- New aluminium watertight rear door
- 2x new direct-glazed back wheelhouse windows
- New quick-release tow hook
- Heavy duty tyres for fendering installed all round
- Full external paint job completed August 2022. Spray painted by a contractor in Wattyl 2 pack on all topsides, antifoul
and Propspeed on the propeller
- toilet and aft entrance area refurbished
*** A comprehensive inventory list can be supplied on request ***
DOWNLOAD THE TENDER OFFER DOC WITH INSTRUCTIONS BELOW.
CALL MATTHEW on or PAUL on for further information
Price
AU $120,000 Buyers over
Vessel Name
"TAWE"
Boat Reference
15127708
Launch Year
1967 approximate
Length
51' 5" - 15.67m
Beam
4.54m
Draft
2.6m
Displacement
50 Tonnes approx.
Vessel Location
Prince Of Wales Bay Marina (end Of "b" Arm)
Region
Tasmania
Use
Commercial
Registration
446878
Hull Material
Steel Topsides spray painted by contractor in Wattyl 2 pack. Bottom antifouled.
Decks Material
Steel
Engine
*340hp GM - DETROIT 12V71 Main Engine.
Twin Disc Gearbox MG514 6:1 transmission, 61.5"
Recently serviced/overhauled... Main Engine, heat exchanger and raw water pump fully overhauled.
4-blade 1600mm work propeller
*Auxiliary engine: Ford C11003 6-cylinder.
Engine Make
Detroit
Fuel Type
Diesel
Cruise Speed
Operating speed 8 knots.
Propulsion
Shaft driving a 4-blade 1600 mm propeller (Propspeed treated)
Fuel
7800 litres
Ground Tackle
Hydraulic Anchor Winch (overhauled)
2 x New anchors and chain.
2 x New anchors and chain.
Bilge Pumps
NEW Jabsco Bilge/Fire fighting pump.
Fire Protection
Firepro firefight system.
Electrics
DC electrical system fully rewired.
NEW Batteries - start, house and radio.
NEW Batteries - start, house and radio.
Electronics / Navigation
TMQ AP4 Autopilot. (NEW)
CONTACT DETAILS
Dealer
Boat Sales Tasmania
Telephone
Address
Royal Yacht Club of Tasmania
Marieville Esplanade, Sandy Bay
Hobart TAS Australia
Marieville Esplanade, Sandy Bay
Hobart TAS Australia
Website
MORE BOATS FROM BOAT SALES TASMANIA