Custom
Currency
Length
27' 0" - 8.23m
Vessel Location
Maryborough QLD
Launch Year
2018
Hull Material
Composite
MARK WALKER CUSTOM DESIGN AND BUILD.
THIS IS WORKMAN SHIP TO THE HIGHEST POSSIBLE STANDARD
27 ft WEAPON.. Vynelester Resin and foam core hand laid construction. [ composite. ]
This means its ridiculously strong and the build comes in on weight.
Foam core Vynelester composite deck and house.
SOFT riding hull with deadrise of 17 degrees, cruise at 23 knots @4000 RPM
WOT speed = 35 knots
Yamaha 200 HP saltwater series. 265 hours since new. Full service 20 hours ago
2.450 m beam [ legal]
1540 KG dry weight
Tandem trailer with Alko electric brakes
Trailer weight circa 500 KG
Trailer built of Blue scope steel. Epoxy painted
2 x 110 litre fuel tanks with gauges
2 x 70 litre water tanks
Separate TMC toilet with 70 litre holding tank.
Upper and lower berths in forward sleeping cabin
Vessel finished in two pack poly urethane paint.
VHF radio
Marine stereo
10 inch Lowrance plotter / sounder
Hummingbird small dash sounder
TMC bilge pump
Lenevo trim tabs
Anchors / fenders/ safety equipment
This vessel can be inspected and sea trialed in Hervey Bay. Get ready to be impressed
This is a ridiculous low price for a hand built vessel, that has been created by a true ARTISAN.
The last picture here is of a GRP Tassie cray boat design that Mark Walker and i colaberated on and launched in 2010.
This vessel was also built to the highest possible standards. Mark was the head boat builder on this project.
As a boat builder Mark gets my highest reccomendation
THIS IS WORKMAN SHIP TO THE HIGHEST POSSIBLE STANDARD
27 ft WEAPON.. Vynelester Resin and foam core hand laid construction. [ composite. ]
This means its ridiculously strong and the build comes in on weight.
Foam core Vynelester composite deck and house.
SOFT riding hull with deadrise of 17 degrees, cruise at 23 knots @4000 RPM
WOT speed = 35 knots
Yamaha 200 HP saltwater series. 265 hours since new. Full service 20 hours ago
2.450 m beam [ legal]
1540 KG dry weight
Tandem trailer with Alko electric brakes
Trailer weight circa 500 KG
Trailer built of Blue scope steel. Epoxy painted
2 x 110 litre fuel tanks with gauges
2 x 70 litre water tanks
Separate TMC toilet with 70 litre holding tank.
Upper and lower berths in forward sleeping cabin
Vessel finished in two pack poly urethane paint.
VHF radio
Marine stereo
10 inch Lowrance plotter / sounder
Hummingbird small dash sounder
TMC bilge pump
Lenevo trim tabs
Anchors / fenders/ safety equipment
This vessel can be inspected and sea trialed in Hervey Bay. Get ready to be impressed
This is a ridiculous low price for a hand built vessel, that has been created by a true ARTISAN.
The last picture here is of a GRP Tassie cray boat design that Mark Walker and i colaberated on and launched in 2010.
This vessel was also built to the highest possible standards. Mark was the head boat builder on this project.
As a boat builder Mark gets my highest reccomendation
Price
AU $49,000
Boat Reference
N A
Launch Year
2018
Length
27' 0" - 8.23m
Beam
2450
Draft
650 mil with engine down
Displacement
1540 dry weight
Vessel Location
Maryborough Qld
Region
Queensland
Use
Cruising, In-shore Fishing, Off-shore Fishing
Designer
Mark Walker
Builder
Mark Walker [ professional]
Hull Material
Composite
Decks Material
Composite epoxy
Engine
200 hp Salt water series with 265 hours since new. Full service 20 hours ago
Engine Make
Yamaha
Number Engines
1
Horsepower
200 hp
Max Speed
35 knots
Cruise Speed
23 knots
Propulsion
Out board
Fuel
220 litres total
Accommodation
Upper and lower berths in forward cabin
Remarks
All care but no responsibility taken what so ever by Jim Stuart Marine for the accuracy of the above information.
CONTACT DETAILS
Dealer
Jim Stuart Marine
Telephone
Address
183 Melville Terrace
Manly (Brisbane) QLD Australia
Manly (Brisbane) QLD Australia
Website
MORE BOATS FROM JIM STUART MARINE
