Island Inflatables Island Airdeck 290 Includes Lowrance Hook Reveal fish-finder
Price
AU $2,300 Or nearest offer
Currency
Length
9' 6" - 2.90m
Vessel Location
Mordialloc VIC
Launch Year
2025
Hull Material
Inflatable
Island 2.9m Inflatable Boat with 5hp Parsun 4-stroke motor in excellent condition with rego. No trailer required, can be transported on roof rack or general box trailer. Boat weight including floors, oars and seating is only 35kgs.
Only been used for one Summer. Just been run in and used for about 20 hours.
Sale includes all the items necessary to operate this boat including a fully working Lowrance Hook Reveal fish-finder chart plotter sonar, oars, anchor, life jackets, repair kit, flares etc.
Only genuinely interested cash buyers, please. Viewing in Mordialloc, Victoria.
$2300.00 ONCO.
Only been used for one Summer. Just been run in and used for about 20 hours.
Sale includes all the items necessary to operate this boat including a fully working Lowrance Hook Reveal fish-finder chart plotter sonar, oars, anchor, life jackets, repair kit, flares etc.
Only genuinely interested cash buyers, please. Viewing in Mordialloc, Victoria.
$2300.00 ONCO.
Price
AU $2,300 Or nearest offer
Launch Year
2025
Length
9' 6" - 2.90m
Vessel Location
Mordialloc Vic
Region
Victoria
Use
Leisure, In-shore Fishing
Rego Expiry
01/05/2027
Hull Material
Inflatable
Engine
Almost new
Engine Make
Parsun
Horsepower
10HP
Fuel Type
Petrol : Petrol
Engine Hours
Approximately 20 hours only
Propulsion
Outboard Motor : 5HP
Genset
Parsun 7.4KW
Fuel
10 litres
Ground Tackle
Ground Anchor
Life Jackets
2
Flares
Yes
Fire Protection
Yes
Electronics / Navigation
Lowrance Hook Reveal fish-finder
Remarks
INFORMATION FROM ISLAND BOATS WEBSITE REGARDING THIS BOAT
Tender or Holiday Fun
Island Inflatables' 2.9m boat with air-deck floor and 2 seats is the perfect tender for your 30ft-plus cruiser or yacht. Alternatively, as our largest roll-up boat, its compact size and light weight makes it great for holidays. Simply pack it away in the back of your car or caravan until it's time to hit the water.
Made to Last
All Island Inflatables boats are designed in Australia using high-frequency thermo welding (HFTW) techniques for all seams for guaranteed durability against the harsh Australian conditions. Our seams can handle heat and hot days easily, so you can relax and stay cool in the water. Plus, thanks to an overinflation valve, our boats are even more capable of withstanding hot weather, while ensuring correct air pressure is maintained.
Island Inflatables is Australia's top-selling privately owned inflatable boat brand for good reason. For starters, all our boats are designed by us, rather than rebranding existing models. Integral to our boats' outstanding quality is our commitment to using the strongest PVC available. You'll find all Island Inflatables boats are graded at 1100 D-teck denier (0.9mm thickness) for improved durability. The underside of the boat also has an additional PVC layer to provide extra protection against rocks and shells when launching or moving across the ground.
At Island Inflatables, we want you to enjoy countless trips in our boats, whether you're using them as a tender, for a spot of fishing or for some wild watersports action. Therefore, the sides of the boat and around the keel have specialised non-marking wear strips. This protects both your Island Inflatables boat and any other boats if bumps occur, as well as preventing unsightly rub marks. Similarly, we have ensured that our boats only ever use large, heavy-duty stainless steel tow rings, with large reinforced mounting patches. This means you can waterski or tube without seeing any fraying around the tow ring.
Easy to Use, Even Easier to Love
Another key aspect Island Inflatables considered during the design and manufacturing phases of our boats was portability and ease of use. This is why all our boats are fitted with internal rear carry handles, so a single person can carry the boat when inflated. If you're trying to wrangle kids or just want some quiet time out on the water, this is a real lifesaver. Plus, ensuring the handles are on the inside prevents them from scratching your cruiser or yacht if you use this boat as a tender.
As our boats can be fitted with an outboard motor so you can really feel the wind in your hair, we have also taken great care in designing the transom area. All our transoms are coated with epoxy coating and rubber sealing, with an internal and external outboard mounting plate for easy and safe motor use.
Ride in Comfort
Additionally, we want you to have a comfortable, dry ride (until you're ready to take a dip, that is). That's why all our out tubes are oversized, enhancing stability. Similarly, we use one-way bungs so you can get rid of excess water quickly. Plus, you can sit back and relax in comfort as the grab rope is on the side of the tube rather than the top.
Stylish Design
Finally, you'll find all Island Inflatables boats are carefully designed in terms of style and aesthetic. All models between 2 and 3 metres are predominantly white, with black accents, to complement any cruisers or yachts they may be tender for, rather than sticking out like a sore thumb. This also ensures that heat is reflected off the boat, making them more comfortable to relax in.
Tube air pressure in sequence of inflation:
Outside Tubes: 3.6 PSI
Inflatable Floor: 10 PSI
Inflatable Keel: 3.6 PSI
Features:
Material: Heavy Duty 1100 D-Teck denier polyester coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
AIR-Deck Floor: High Pressure floor for ridget ride and firm to stand on.
Inflatable keel
Double layer of PVC mateerial on underside of tubes
2 Seats
2 Internal Rear Carry handles
Combination Front Carry handle Bow ring with mooring rope
2 Heavy Duty Stainless steel tow rings with extra reinforcing
Non-marking all round rubbing strakes.
Off-set Safety / Grab ropes
24mm thick marine grade transom with rubber capping
Inside / Outside motor plates
Self bailing one way bung / drain plug
Over inflatation valve
2 Internally sealed bulkheads to equalize tube pressures
Tender or Holiday Fun
Island Inflatables' 2.9m boat with air-deck floor and 2 seats is the perfect tender for your 30ft-plus cruiser or yacht. Alternatively, as our largest roll-up boat, its compact size and light weight makes it great for holidays. Simply pack it away in the back of your car or caravan until it's time to hit the water.
Made to Last
All Island Inflatables boats are designed in Australia using high-frequency thermo welding (HFTW) techniques for all seams for guaranteed durability against the harsh Australian conditions. Our seams can handle heat and hot days easily, so you can relax and stay cool in the water. Plus, thanks to an overinflation valve, our boats are even more capable of withstanding hot weather, while ensuring correct air pressure is maintained.
Island Inflatables is Australia's top-selling privately owned inflatable boat brand for good reason. For starters, all our boats are designed by us, rather than rebranding existing models. Integral to our boats' outstanding quality is our commitment to using the strongest PVC available. You'll find all Island Inflatables boats are graded at 1100 D-teck denier (0.9mm thickness) for improved durability. The underside of the boat also has an additional PVC layer to provide extra protection against rocks and shells when launching or moving across the ground.
At Island Inflatables, we want you to enjoy countless trips in our boats, whether you're using them as a tender, for a spot of fishing or for some wild watersports action. Therefore, the sides of the boat and around the keel have specialised non-marking wear strips. This protects both your Island Inflatables boat and any other boats if bumps occur, as well as preventing unsightly rub marks. Similarly, we have ensured that our boats only ever use large, heavy-duty stainless steel tow rings, with large reinforced mounting patches. This means you can waterski or tube without seeing any fraying around the tow ring.
Easy to Use, Even Easier to Love
Another key aspect Island Inflatables considered during the design and manufacturing phases of our boats was portability and ease of use. This is why all our boats are fitted with internal rear carry handles, so a single person can carry the boat when inflated. If you're trying to wrangle kids or just want some quiet time out on the water, this is a real lifesaver. Plus, ensuring the handles are on the inside prevents them from scratching your cruiser or yacht if you use this boat as a tender.
As our boats can be fitted with an outboard motor so you can really feel the wind in your hair, we have also taken great care in designing the transom area. All our transoms are coated with epoxy coating and rubber sealing, with an internal and external outboard mounting plate for easy and safe motor use.
Ride in Comfort
Additionally, we want you to have a comfortable, dry ride (until you're ready to take a dip, that is). That's why all our out tubes are oversized, enhancing stability. Similarly, we use one-way bungs so you can get rid of excess water quickly. Plus, you can sit back and relax in comfort as the grab rope is on the side of the tube rather than the top.
Stylish Design
Finally, you'll find all Island Inflatables boats are carefully designed in terms of style and aesthetic. All models between 2 and 3 metres are predominantly white, with black accents, to complement any cruisers or yachts they may be tender for, rather than sticking out like a sore thumb. This also ensures that heat is reflected off the boat, making them more comfortable to relax in.
Tube air pressure in sequence of inflation:
Outside Tubes: 3.6 PSI
Inflatable Floor: 10 PSI
Inflatable Keel: 3.6 PSI
Features:
Material: Heavy Duty 1100 D-Teck denier polyester coated PVC. Weight - 1100 g/m2 Thickness 0.9mm
AIR-Deck Floor: High Pressure floor for ridget ride and firm to stand on.
Inflatable keel
Double layer of PVC mateerial on underside of tubes
2 Seats
2 Internal Rear Carry handles
Combination Front Carry handle Bow ring with mooring rope
2 Heavy Duty Stainless steel tow rings with extra reinforcing
Non-marking all round rubbing strakes.
Off-set Safety / Grab ropes
24mm thick marine grade transom with rubber capping
Inside / Outside motor plates
Self bailing one way bung / drain plug
Over inflatation valve
2 Internally sealed bulkheads to equalize tube pressures
CONTACT DETAILS
Name
Kenneth Peek
Telephone
Mordialloc VIC
Australia
Australia