Adams 40 Version 2 Steel
Currency
Length
40' - 12.19m
Vessel Location
Townsville QLD
Launch Year
1991
Hull Material
Steel 6mm
She has a BRAND NEW Volvo Penta D250 installed in May 2020 with less than 20 hours run time.
New dripless PPS shaft seal (Nov 2023). New bilge pumps with float switches (Oct 2021). Three new battery isolators (June 2023). Seven new batteries (March 2023). New antifoul and anodes (Dec 2023).
Designed by Joe Adams with additional interior design work by Graham Radford, This A40v2 is a round biged hull form in 5mm rolled steel plate over 50mm x 100m steel frames. Built and launched in 1991 in Sydney by Arthur Anderson and project managed by Joe Adams himself, she was designed and built as a very capable and fast bluewater cruiser. She is a great cruiser or liveaboard. In 2005 her hull, top sides and deck was completed sandblasted and she had coats of epoxy primer and many coats of two-pack polyurethane applied giving a very good finish.
A later development in the Adams 40 is version two. This style of accommodation was first used in the Adam Traditional 36
and has been a favourite amongst cruising yachtsman. The aft end of the house has a permanent dodger to afford some
protection from the elements whilst still allowing the crew to be out in the cockpit. The extra headroom and feeling of open space makes the yacht very
comfortable. The accommodation shown has a comfortable double berth on the port side and a pilot berth and
navigation station to starboard. And a large V-berth forward.
The hull and deck are in excellent condition. The interior is all polished timber with a v-berth, saloon, galley, nav station with large swivel chair, One open quarter berth and a quarter berth cabin. New Raymarine Plotter with radar and AIS. Raymarine Depth/Speed, Coursemaster 500 autopilot, Navman Speed, Depth, Tracker at nav station with ICOM VHF and HF. Muir anchor windlass controls on deck and in cockpit. Mainsail, cutter sail and headsail all with new covers in very good condition. The centreboard is currently in the closed position and will need some encouragement to come down. Seems to be sticky.
Monitor Windvane
240v/12v/Solar
The information contained within this listing has been compiled by TYBB from information provided by the owner, TYBB accepts no responsibility or liability for any errors or inaccuracies which may appear in this inventory.
New dripless PPS shaft seal (Nov 2023). New bilge pumps with float switches (Oct 2021). Three new battery isolators (June 2023). Seven new batteries (March 2023). New antifoul and anodes (Dec 2023).
Designed by Joe Adams with additional interior design work by Graham Radford, This A40v2 is a round biged hull form in 5mm rolled steel plate over 50mm x 100m steel frames. Built and launched in 1991 in Sydney by Arthur Anderson and project managed by Joe Adams himself, she was designed and built as a very capable and fast bluewater cruiser. She is a great cruiser or liveaboard. In 2005 her hull, top sides and deck was completed sandblasted and she had coats of epoxy primer and many coats of two-pack polyurethane applied giving a very good finish.
A later development in the Adams 40 is version two. This style of accommodation was first used in the Adam Traditional 36
and has been a favourite amongst cruising yachtsman. The aft end of the house has a permanent dodger to afford some
protection from the elements whilst still allowing the crew to be out in the cockpit. The extra headroom and feeling of open space makes the yacht very
comfortable. The accommodation shown has a comfortable double berth on the port side and a pilot berth and
navigation station to starboard. And a large V-berth forward.
The hull and deck are in excellent condition. The interior is all polished timber with a v-berth, saloon, galley, nav station with large swivel chair, One open quarter berth and a quarter berth cabin. New Raymarine Plotter with radar and AIS. Raymarine Depth/Speed, Coursemaster 500 autopilot, Navman Speed, Depth, Tracker at nav station with ICOM VHF and HF. Muir anchor windlass controls on deck and in cockpit. Mainsail, cutter sail and headsail all with new covers in very good condition. The centreboard is currently in the closed position and will need some encouragement to come down. Seems to be sticky.
Monitor Windvane
240v/12v/Solar
The information contained within this listing has been compiled by TYBB from information provided by the owner, TYBB accepts no responsibility or liability for any errors or inaccuracies which may appear in this inventory.
Price
AU $105,000
Boat Reference
Y-523
Launch Year
1991
Length
40' - 12.19m
Beam
3.63
Draft
1.6M up/ 2.6M down
Displacement
10.5 tonne
Keel / Ballast
Swing keel in steel keel stub with lead in stub
Vessel Location
Townsville Qld
Region
Queensland
Use
Leisure, Cruising, Live Aboard
Designer
Joe Adams
Builder
Arthur Anderson
Hull Material
Steel 6mm
Decks Material
Steel 5mm
Engine
D250.; Brand new
Engine Make
Volvo Penta
Number Engines
1
Horsepower
75
Fuel Type
Diesel
Engine Hours
00:30
Fuel Consumption
3.5lph at cruise
Max Speed
7.5
Cruise Speed
6
Propulsion
3 blade fixed
Fuel
330
Water
260
Dinghy
Yes
Outboard
Yamaha 2.5HP
Covers
New Sail covers. Boom cover and foredeck covers. Dodger and bimini
Berths
6
Shower
Yes
Toilet
Yes manual with holding tank
Entertainment
Stereo and TV
Refrigeration
1 x 60 (approx. )litre 12v Danfoss refrigeration in good condition.
Stove
Mariner Princess Two burner gas stove with grill and oven.
Ground Tackle
Muir Cheetah. Manson 25KG with 100m 3/8" chain. Danforth with 200m rode
Electrics
240v/12v/Solar
Electronics / Navigation
Raymarine Chart with AIS and Radar. Raymarine Speed/Depth. Navman Speed/Depth/Tracker. ICOM VHF and HF. Coursemaster 500 Autopilot.
Sail Inventory
Main, Cutter and Headsail.
Mast / Rigging
Keel steeped double inline speader aluminium
CONTACT DETAILS
Dealer
Townsville Yacht & Boat Brokerage
Telephone
Address
Breakwater Marina
Mariners Dv
Townsville QLD Australia
Mariners Dv
Townsville QLD Australia
Website
MORE BOATS FROM TOWNSVILLE YACHT & BOAT BROKERAGE