Traditional 30


Price
AU $42,000
Finance
Pre-Purchase Inspection
Currency
Length
29' 10" - 9.10m
Vessel Location
Pittwater, Sydney NSW
Launch Year
1983
Hull Material
Fibreglass/GRP

Traditional 30.

SINEAD was launched circa 1984 and is one of the nicest Traditional 30s that we have seen.

Exclusively for sale with DBY Boat Sales, she comes with a mint condition 2011 model Kubota 22hp diesel engine and only a very low 280 hours of use. The engine has had a recent service in October 2025 plus she was slipped for antifoul at the same time.

The cockpit on a Traditional 30 is large and has enough length in her bench seats to stretch out and snooze on the cockpit cushions after a day of sailing. Sails are only a few years old and the rigging was replaced in 2016. There is a spinnaker and 2 spinnaker poles to complete the sail wardrobe.

The accommodation can sleep 6 and the settee is amongst the biggest you will get on a 30 footer.

The galley is U shaped and very functional with a gas certificate for the 2014 model SMEV stainless steel cooktop and oven.

There is a generous sized spray dodger to protect you from the elements plus a bimini on a stainless steel folding frame over the helm area.

A deep swim ladder on the transom makes for easy water access.

If you have been looking for a Traditional 30, it will be hard to find better one than this one.

Give DBY Boat Sales a call on or email us to arrange an inspection.


Designer: Peter Cole

Built by: Traditional Yachts (Australia).

LOA: ~30.08 ft (9.17 m), LWL ~25 ft (7.62 m)


Beam: ~9.8 ft (~3 m)


Draft: approx 1.65 m (5.4 ft)


Displacement: ~3,751 kg


Ballast: ~1,682 kg


Sail Area: ~35.3 m combined main + foretriangle

Specifications:

Des igner : Peter Cole
Builder : Traditional Yachts

Water (Potable) Capacity (l) : 100

Hull Construction Material : Fibreglass
Hull Type : Mono
Deck Construction Material : Fibreglass

Country Origin : Australia

Length (feet) : 30 feet
Length (m) : 9.1 m
Beam/Width (feet) : 9'9 feet
Beam/Width (m) : 3 m
Draft (m) : 1.67 m
Draft (feet) : 5'2 feet
Keel/Ballast : Fin keel cast iron
Number of Helms : 1 stainless steel wheel
Displacement : 3743 kg

Engine Notes : Kubota 22hp diesel 2011 model
Number Of Engines : 1
Engine Standard : Well maintained and just service October 2025
Stroke : 4
Engine Hours : 280
Horse Power (hp) : 22
Drive Type : Saildrive
Number of Batteries : 2
Fuel Type : Diesel
Number of Fuel Tanks : 1 x stainless steel
Fuel Tank Capacity (L) : 40
Propeller : Two blade folding
Steering System : Stainless steel wheel connected to chain and cables to quadrant

Accommodation Notes : Large V berth, aft quarter berth single, sofa to starbord side and settee drops to create additional queen sized bed.
Number of Berths : 6
Number of Showers : 1
Shower Type : Cold pressurised
Toilet Type : Jabsco manual pump

Stove : 2014 SMEV gas stove top and oven

Entertainment and Appliances Notes : Sound system

Anchor / Winch : Electric anchor winch
Bilge Pump : 1 x auto plus 1 manual
Deck Gear : Boat hook, fenders, deck winches x 6

Mast/Rigging : 2016 mast and boom removed and re painted by Whale spars, all rigging replaced in 2016
Sail Inventory : Main 2013 fully battened in boom bag with lazy jacks, Genoa 2021 on furler plus good condition spinnaker

Electrics : 12v, 2 batteries plus solar panel, 12v outlets
Electronics Navigation : Pedestal compass, barometer, clock, torch,

Dinghy : No

Covers : Bimini over helm on stainless frame, spray dodger, UV strip on headsail. Boom bag. Rope bags in cockpit, winch covers

Safety Gear : Life jackets, fire blanket, barometer, first aid, fire extinguisher
Ground Tackle : Plough anchor, ample chain and rode.
Has Navigation Lights : Yes
Radio : VHF with distress function
Number of Life Jackets : 4

Remarks : Inspection highly recommended.

Vessel Name : SINEAD
Anti-foul : October 2025


Price
AU $42,000   
Vessel Name
SINEAD
Boat Reference
DBY00178
Launch Year
1983
Length
29' 10" - 9.10m
Beam
3m
Draft
1.67m
Displacement
3743
Keel / Ballast
Fin keel cast iron
Vessel Location
Pittwater, Sydney Nsw
Region
New South Wales
Use
Family, Leisure, Cruising
HIN
AUWWA115782GP1
Registration
JX107N
Rego Expiry
09/12/2025
Designer
Peter Cole
Builder
Traditional Yachts
Hull Material
Fibreglass/GRP
Decks Material
Fibreglass
Engine
Kubota 22hp diesel 2011 model
Engine Make
Kubota
Number Engines
1
Horsepower
22
Fuel Type
Diesel
Engine Hours
280
Propulsion
Two blade folding.
Fuel
40
Dinghy
No
Covers
Bimini over helm on stainless frame, spray dodger, UV strip on headsail. Boom bag. Rope bags in cockpit, winch covers
Accommodation
Large V berth, aft quarter berth single, sofa to starbord side and settee drops to create additional queen sized bed.
Toilet
Jabsco manual pump
Stove
2014 SMEV gas stove top and oven
Ground Tackle
Plough anchor, ample chain and rode.
Safety Gear
Life jackets, fire blanket, barometer, first aid, fire extinguisher
Bilge Pumps
1 x auto plus 1 manual
Electrics
12v, 2 batteries plus solar panel, 12v outlets
Electronics / Navigation
Pedestal compass, barometer, clock, torch,
Sail Inventory
Main 2013 fully battened in boom bag with lazy jacks, Genoa 2021 on furler plus good condition spinnaker
Mast / Rigging
2016 mast and boom removed and re painted by Whale spars, all rigging replaced in 2016
Deck Gear
Boat hook, fenders, deck winches x 6
Remarks
SINEAD was launched circa 1984 and is one of the nicest Traditional 30s that we have seen.

CONTACT DETAILS
Dealer
DBY Boat Sales Pittwater
Telephone
Address
Princes Street Marina
16 Princes Street
Newport Beach
Sydney NSW Australia


CONTACT THE SELLER
We take your privacy very seriously - your contact details are never shared!
MORE BOATS FROM DBY BOAT SALES PITTWATER