NEW Sabrecraft Marine WB7400 - 7.40 Meter Work Boat Punt *AVAILABLE NOW*
Price
AU $44,850 Plus GST if applicable
Currency
Length
24' 3" - 7.40m
Model Year
2023
Hull Material
Aluminium Marine Grade 5083 H116
**CURRENTLY IN STOCK AVAILABLE FOR IMMEDIATE SHIPPING TO PERTH**
Lead Time 2 weeks, please contact Amy for further information
Vessel is not fitted with motors, see video for all features currently fitted, motors, trailer and additions are quoted seperately. Please contact for pricing
These are the best built work punts on the market, as well as the best priced in Australia today
They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.20 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate
In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve
The rear area behind the seat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills or by hand
The paint is Marine Grade PU inside is White and the outside colour is your choice
These are Production Boats with stock normally always ready in the factory, on the water or in Australian holding yard Brisbane
Certification
These boats are plan approved to AMSA Domestic Commercial Vessel
Sabrecraft Marine is also the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA, no survey inspection required, less headaches with inspections and costly Surveyors fees
Specifications WB7400
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 7.40 meters
Width OA: 2.30 meters
Height OA: 0.75 meters
Forward section fitted with bump fender
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat
Lifting lugs fitted x 4
Forward bow storage
Navigation Lights: Forward
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: AMSA - Domestic Commercial Vessel
Approval 2: CE Module B Category D
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Bilge Pumps: 2 x 2000 GPH
Warranty: Structural 5 years - Fittings 12 Months
Additional Fittings
Side Fenders (poly pipe) - Top Full Length: $740.00
Side Fenders (poly pipe) - Top Bottom Full Length: $740.00
Side Seating - Both sides: $1,950.00
Enclosed Sides: $4,670.00
Side Console: $980.00
Cable Steering + Whhel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $2,350.00
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,570.00
Motor Guard - $2,850.00
Canopy 1.50 x 2.30: $2,650.00
Canopy 3.00 x 2.30: $2,970.00
Canopy 4.00 x 2.30: $3,360.00
Canopy 5.00 x 2.30: $3,950.00
Canopy 6.00 x 2.30: $4,480.00
Ant-foul Hull and Sides 300mm - $880.00
Engines - Ask about Pricing
We stock Yamaha, Suzuki and Mercury
Trailers TWB5900 or TWB7400
Built to AS4177.3-2003-ADR-VSB1-Rev 6
Rating: 2,000kg
o Frame: Aluminium
o Coupling: 50mm Hydraulic with Breakaway System
o Axles: 2 x HDG - 2000kg rating each
o Suspension: Torsion Bar
o Brakes: Kodiac Disc on all wheels
o Wheels: Hot dipped galvanised
o Tyres: 14" 185R trailer rated
Price: $14,850 no rego
Aluminium Boating Specialists!
Sabrecraft Marine is truly a one stop shop for all your vessel design, certification and manufacturing needs. With our inhouse naval architects, AMSA approved surveyor, CE certified products and precision CNC, contact us today to discuss your next boating adventure!!
Ally Work Boat, Alloy Work Boat, Alley Work Boat, Plate Work Boat, Ally Work Punt, Alloy Work Punt, Alley Work Punt, Plate Work Punt, Ally Work Cat, Alloy Work Cat, Alley Work Cat, Plate Work Cat, Mini Tug, Micro Tug, Tug Boat, Ally Tug, Alloy Tug, Ally Barge, Alloy Barge, Alley Barge, Landing Barge, Deck Barge, Self-Propelled Barge, Modular Barge, Work Punt, Work Boat, Work Cat, Jack Up Barge, Construction Barge, Dumb Barge, Landing Craft, Utility Vessel, LCMH, Man Overboard Boat, Man Overboard Vessel, Firefighting Vessel, Fire Fighting Boat, Fire Fighting Rescue, Rescue Vessel, Rescue Boat, Line Boat, Line Vessel, Supply Vessel, Supply Ship, Crew Change Vessel, Crew Change Boat, Transfer Vessel, Service Vessel, Patrol Boat, Glass Bottom, Tourist Vessel, Ferry Pile Cat, Pylon Repair, Pylon Wrapping, Wharf Maintenance, Multipurpose Vessel
Lead Time 2 weeks, please contact Amy for further information
Vessel is not fitted with motors, see video for all features currently fitted, motors, trailer and additions are quoted seperately. Please contact for pricing
These are the best built work punts on the market, as well as the best priced in Australia today
They are not plank boats, these are a true heavy-duty Marine Grade Plate Aluminium boat with double floor and 100 x 50 RHS internal floor structure. All floors are pressure tested in the factory to 0.20 bar. Bottom and Side Plate is 5mm with the Main Deck and Forward Deck, slot welded 4mm plate
In fact, everything about these boats are truly Heavy Duty, Bollards, Toe Holds, Grab Rails, Boarding Ladder, Covers for the Bilge Pumps, Fuel Tank, Lifting Lugs, Console and we are always looking to improve
The rear area behind the seat is now recessed 50mm to allow for any water, fuel spills to concentrate within the bunded area for removal by the built in bilge pumps or if fuel spills or by hand
The paint is Marine Grade PU inside is White and the outside colour is your choice
These are Production Boats with stock normally always ready in the factory, on the water or in Australian holding yard Brisbane
Certification
These boats are plan approved to AMSA Domestic Commercial Vessel
Sabrecraft Marine is also the first company to have available in Australia "CE Approval" Module B Category D. They can be used as work boats under Self Declaration Form 579 with AMSA, no survey inspection required, less headaches with inspections and costly Surveyors fees
Specifications WB7400
Construction Material: 4/5mm Marine Grade 5083 H116 Aluminium
Length OA: 7.40 meters
Width OA: 2.30 meters
Height OA: 0.75 meters
Forward section fitted with bump fender
Gunwale Tie Down Rail: Full length
Deck Toe Hold: Full Length
Floor structure is double plate fully welded with 100x50 RHS longitudinals & cross bracing
120lt aluminium fuel tank fitted into transom behind seat
Lifting lugs fitted x 4
Forward bow storage
Navigation Lights: Forward
Deck is aluminium plate 4mm coated with non-slip rubber membrane
Approval 1: AMSA - Domestic Commercial Vessel
Approval 2: CE Module B Category D
Motor: Maximum 200hp (not included)
Colour -TBA Client's choice, single colour
Batteries: Twin with high amperage isolator switch
Bilge Pumps: 2 x 2000 GPH
Warranty: Structural 5 years - Fittings 12 Months
Additional Fittings
Side Fenders (poly pipe) - Top Full Length: $740.00
Side Fenders (poly pipe) - Top Bottom Full Length: $740.00
Side Seating - Both sides: $1,950.00
Enclosed Sides: $4,670.00
Side Console: $980.00
Cable Steering + Whhel: $780.00
Heavy Duty Hydraulic Steering + Wheel: $2,350.00
High pressure deck wash and hose: $380.00
Gunwale Grab Rail - Both sides: $1,570.00
Motor Guard - $2,850.00
Canopy 1.50 x 2.30: $2,650.00
Canopy 3.00 x 2.30: $2,970.00
Canopy 4.00 x 2.30: $3,360.00
Canopy 5.00 x 2.30: $3,950.00
Canopy 6.00 x 2.30: $4,480.00
Ant-foul Hull and Sides 300mm - $880.00
Engines - Ask about Pricing
We stock Yamaha, Suzuki and Mercury
Trailers TWB5900 or TWB7400
Built to AS4177.3-2003-ADR-VSB1-Rev 6
Rating: 2,000kg
o Frame: Aluminium
o Coupling: 50mm Hydraulic with Breakaway System
o Axles: 2 x HDG - 2000kg rating each
o Suspension: Torsion Bar
o Brakes: Kodiac Disc on all wheels
o Wheels: Hot dipped galvanised
o Tyres: 14" 185R trailer rated
Price: $14,850 no rego
Aluminium Boating Specialists!
Sabrecraft Marine is truly a one stop shop for all your vessel design, certification and manufacturing needs. With our inhouse naval architects, AMSA approved surveyor, CE certified products and precision CNC, contact us today to discuss your next boating adventure!!
Ally Work Boat, Alloy Work Boat, Alley Work Boat, Plate Work Boat, Ally Work Punt, Alloy Work Punt, Alley Work Punt, Plate Work Punt, Ally Work Cat, Alloy Work Cat, Alley Work Cat, Plate Work Cat, Mini Tug, Micro Tug, Tug Boat, Ally Tug, Alloy Tug, Ally Barge, Alloy Barge, Alley Barge, Landing Barge, Deck Barge, Self-Propelled Barge, Modular Barge, Work Punt, Work Boat, Work Cat, Jack Up Barge, Construction Barge, Dumb Barge, Landing Craft, Utility Vessel, LCMH, Man Overboard Boat, Man Overboard Vessel, Firefighting Vessel, Fire Fighting Boat, Fire Fighting Rescue, Rescue Vessel, Rescue Boat, Line Boat, Line Vessel, Supply Vessel, Supply Ship, Crew Change Vessel, Crew Change Boat, Transfer Vessel, Service Vessel, Patrol Boat, Glass Bottom, Tourist Vessel, Ferry Pile Cat, Pylon Repair, Pylon Wrapping, Wharf Maintenance, Multipurpose Vessel
Price
AU $44,850 Plus GST if applicable
Boat Reference
WB7400
Model Year
2023
Length
24' 3" - 7.40m
Beam
m
Draft
m
Displacement
Tonnes
Region
Western Australia
Hull Material
Aluminium Marine Grade 5083 H116
CONTACT DETAILS
Dealer
Gold Coast Marine
Amy Stirrup
Amy Stirrup
Telephone
Address
247 Bayview Street, QLD, 4216
City / Suburb
Hollywell
State
QLD
Country
Australia
Website
MORE BOATS FROM GOLD COAST MARINE
