Carver 396 Aft Cabin Big volume and the $$ have been spent!
Currency
Length
39' 0" - 11.89m
Vessel Location
Power and Sail Perth WA
Launch Year
2006 approximate
Hull Material
Fibreglass/GRP
![Member of Marine Brokers Institute of WA](https://imgs.yachthub.com/imgs/bia/marine_WA_MBIA_accredited.png)
Great layout with a huge salon and galley area with the master being full beam and aft and the VIP is forward of the galley and could easily be a master as well.
Fully equipped galley with plenty of storage and counter space to complete the package.
It just needs a little bit of TLC as the current owner is time poor and it will sparkle. Grab an awesome boat at an incredible price and get out there.
A bit of maintenance history: The owner happy for you to speak with his mechanic to walk you through the extensive works completed.
Stbd engine was removed Feb 24 and sent to Favazzo's Engine reconditioners-Block was bored. 020" Crankshaft checked and polished Cam shaft was checked and polished.
Engine block was checked and machined, new main bearings and big end bearings installed and short motor assembled. 020" pistons and rings supplied & installed.
Brand new (not reconditioned) cylinder head installed.
Fremantle Fuel Injection Shop- Fuel injection pump was bench tested. Fuel injectors were overhauled Turbo charger was overhauled
Starboard engine aftercooler and heat exchanger were serviced and resealed.
New drive coupling was installed.
A new Sea water pump was installed starboard engine
New sea water intake hose fitted and seawater pick up valve freed up starboard engine
Both Port and Starboard Prop shafts and seal assemblies were removed and replaced.
Sea Water intake hose Port engine was replaced and seawater pick up valve serviced.
Port engine was inspected for serviceability and found to be running very well.
Generator was inspected for serviceability and running well.
All Batteries were replaced including both start batteries 2 house batteries and genset battery.
All 3 bilge pumps were replaced and new float switches installed
Aft toilet suction pump was replaced.
Anchor winch was removed and checked-repaired winding terminal and new cables fitted.
Call Neil NOW to come see this ripper boat get ready for Spring and those extended stays aboard CALL .
Price
AU $189,000 Make an offer
Launch Year
2006 approximate
Length
39' 0" - 11.89m
Beam
4.24 mtr
Draft
1.07 mtr
Displacement
13,381 kgs
Vessel Location
Power And Sail Perth Wa
Region
Western Australia
Use
Family, Leisure, Cruising
Designer
Carver
Hull Material
Fibreglass/GRP
Decks Material
GRP
Engine
Twin Diesel
Engine Make
Volvo
Number Engines
2
Fuel Type
Diesel
Engine Hours
2hrs since recon
Engine Hours (2nd Engine)
TBA
Max Speed
22knts
Cruise Speed
16-18knts
Propulsion
Shaft drive
Genset
Yes
Fuel
1250ltr
Water
340ltr
Accommodation
Apartment style living in 2 spacious master cabins with separate bathroom facilities. 2.13mtr headroom in main cabin.
Cabins
2
Berths
4 plus in absolute comfort
Shower
Yes
Toilet
Yes with holding tank
Air-Con
Yes
Galley
Huge galley style kitchen
Refrigeration
Yes
Freezer
Yes
Stove
Yes
Hot Water
Yes
Bilge Pumps
Yes
Epirb
Yes
Life Jackets
Yes
Flares
Yes
Fire Protection
Yes
Remarks
Power and Sail Marine, while preparing this information, has to the best of our ability, within this document provided information that is factual and correct, but we take no responsibility and disclaim all liability for any inaccuracies, or misstatements contained within. Those interested in any of the Power and Sail Marine's vessels listed on consignment should conduct their own research and surveys to confirm the information provided here.
CONTACT DETAILS
Dealer
Power And Sail Marine PL
Neil Mason
Neil Mason
Telephone
Address
All Areas
Fremantle WA Australia
Fremantle WA Australia
Website
MORE BOATS FROM POWER AND SAIL MARINE PL