Botin 56


Price
US $1,100,000 Huge price reduction
Currency
Length
56' 1" - 17.10m
Vessel Location
San Diego
Launch Year
2018
Hull Material
Carbon Fibre Pre preg carbon with Nomex core

Botin 56 Badpak

From the drawing board of Botin, the most up-to-date and successful racing yacht designer in recent times, BADPAK was conceived to be a no-compromise winner with capability for all conditions. She was constructed in October 2018 by King Marine's carbon craftsmen, and project-managed by top industry professionals. A full prepreg carbon construction with a Nomex core gives the yacht ultimate strength and minimal weight.

Ultimately, a comparison with a TP52 will be made, and quite understandably so. Of course, she is the bigger sibling; however, as she is not constrained by a class rule, free thinking in her design, detail, and execution is very evident - resulting in a lower DLR, and proportionally more sail area and righting moment, amongst other benefits.

The rig is a 3-spreader, high-modulus Hall Spars model with EC6 carbon standing rigging, minimising weight aloft and increasing righting moment. The sails are all very fresh, manufactured by North Sails & Doyle Sails in 3Di RAW, currently Marlow rope package; previously Mafioli/Southern Rope. In the power department, there are very few gains left to be made.

On board, the twin-rudder setup gives her incredible straight-line speed and controllability by having rudders that are not only positioned further aft in the yacht, but also orientated more in the vertical plane.

The winch system has recently been converted to all-electric to lighten the yacht and remove complexity from the hydraulic system, resulting in a significant weight reduction. Trimmers are pampered at the primary trimming stations, which are ergonomically designed with Harken Air winches and a bank of buttons to operate the controls quickly and effectively, eliminating the requirement to pump a handle.

The layout is more akin to an F50 than a traditional racing yacht. The hub of the yacht, the pit station, is lowered into a well below the line of the deck, saving windage and helping to lower the VCG. Simple, effective, and powered string drops are the way forward at a tight leeward mark. Similarly, the main trimming station is simple and effective, featuring a single central pod and a range of push-button controls.

The powered runner winches are a godsend for short tacking, and offer secondary advantages as a secondary sheet winch during coastal racing and more complicated foresail setups. The helm position is highly comfortable; the twin wheels with adjustable-height platforms, combined with the twin rudders, make her incredibly controllable and exciting to push hard.

An exquisite detail is the electronic throttles mounted on both sides of the steering pedestals - neat, out of the way, and easily operable. BADPAK has been designed, constructed, prepared, and maintained to the highest possible level, and offers an incredible opportunity for her next owner to continue her winning ways.

Note: Name to be retained by vendor.

In cooperation with Berthon International.

_____________________________________________________________________________________________________________________________

Race Yachts are specialists in all performance yachts, whether it's a 100 foot super maxi or a Farr 30 they deal with it. With extensive experience in Boat Building, Professional Sailing and Sales & Marketing the team at Race Yachts are well equipped to get the job done right.
Connecting Buyers and Sellers in a worldwide market.


Price
US $1,100,000 Huge price reduction   
Vessel Name
Badpak
Boat Reference
B56BP
Launch Year
2018
Length
56' 1" - 17.10m
Beam
4.70
Draft
4.0m
Displacement
8800kg
Keel / Ballast
Fin with Bulb & Twin carbon rudders, with carbon rudder stocks, and floating mechanism for the windward rudder.
Vessel Location
San Diego
Region
North America and Caribbean
Use
Racing
Designer
Botin Partners
Builder
King Marine
Hull Material
Carbon Fibre Pre preg carbon with Nomex core
Decks Material
Pre preg carbon with Nomex core
Engine
4JH (110hp) Diesel SD 60
Engine Make
Yanmar
Horsepower
110hp
Fuel Type
Diesel : 4JH 110HP
Propulsion
Inboard Sail Drive : SD 60
Fuel
79.5lt
Water
53 lt baldder style - Aft on deck water fountain (2021).
Covers
Helm wheel, deck, winch, mainsail, and boom tent covers.
Accommodation
Below decks hanging locker split port and starboard (2021).
Berths
10 x Bunks, with an additional light air set up with extra 2 x bunks forward making for twelve total
Galley
O Custom carbon fibre twin sink removable Galley system with overboard discharge and fresh water electric pump, custom mug receptacle.
o Twin gimbaled MSR reactor burners.
o Removable bunk, galley, nav. Fans (2021).
o Fan, dehumidifier.
Water-Maker
Spectra Cape Horn watermaker (2021).
Safety Gear
O Single 12-person life raft (2021).
o MOM (2021).
o 2 x Sets nav. Lights (2021).
o E-tiller (2021).
Bilge Pumps
2 x Roving water pumps (2021). 7 x Fixed dewatering bilge pumps (2021).
Electrics
O 2 x Mastervolt 24V house batteries (2021). O 1 x Engine battery (2021).
110v charger - twin alternators
Electronics / Navigation
O 2025 PLC by Waypoint Racing with touch screen to adjust winch and ram speed settings.
o B&G fixed VHF with 2 x remote handhelds, with 2 x charging stations.
o Czone control head station.
o 2 x 2025 remote Czone control pads, 1 x aft on helm bar and 1 x in galley.
o B&G H5000 processor and electronics updated by Waypoint Racing.
o 8 x Garmin 2020 at the mast.
o 2 x B&G GFDs in cockpit.
o 2 x B&G 1010 at runners.
o 1 x Boat computer; 1 x boat on deck tablet; 1 x programmable remote for winch or hydraulics control (2021).
Sail Inventory
O Inshore main 2020 luff tape.
o Offshore main-2 with cars (2023).
o J1, J3, J4 North (2018).
o FR0, A2B, A4B, A3 cuben.
o North: GS, Staysail, R1, R2, A-1 (2021).
o (OM-1) Offshore main single reef, storm jib, and trysail, A2, A2.5, A2.5+ North.
o J0, BIG genoa staysail, J2, A1,5, inshore SS, offshore SS (2022)
o Inshore SS, A1.5, OM2 offshore main with 2 reefs, A2.5, J2-2, SGS North (2023).
o A1.5, A2 Doyle, drifter (2024).
o 63% mid girth R1 Doyle structured luff, offshore spin. Staysail, J2-3 (2025).
o J3.5 Doyle, A1.5, A2 (2026).
o Spare battens for main and jib.
o Gorilla foil and spare plastic luff.
o Full batten 1st reef hoist, short foot, spectra delivery main.
Mast / Rigging
O Halls spar high modulus carbon rig, boom and reaching strut.
o EC6 standing rigging.
o 2 x Mast head, 1 x frac, 1 x jib, 1 x main halyard on lock with 2 x more bullets for reefing.
o Antal Mast track added to rig 2021 to facilitate mainsail cars still allows luff tape mainsails.
o 2 x Boom reef locks installed 2022.
o 2 x Bow sprits, with 2 x bobstay rods.
o Rock back lead.
o 2 x External mast jacks with manual pump.
o Mast and Boom - clear coated 2024.
o EC-6 rigging inspected and re-covered Jan. 2026.
o New top mast Jan. 2026.
o New forestay strop Jan. 2026.
o 2 x Mast head wands.
o Spin take down wheel can be installed (will need a motor to drive it).
o Cariboni rams for traveller, outhaul, main Cunningham, jib inhaul, jib down haul, deflector, headstay.
o Bobstay loadcell (2026).
o Headstay loadcell.
o Hydraulic ram added for big genoa staysail/spin staysail for sails used on jib lock- can be removed for a SS furling system for inshore racing.
o Full set running rigging with various spares.
o Deck hardware to race both inshore/offshore.
o 2 x Diverse sheet retrieval systems.
o Below deck staysail furler able to replace hydraulic set up.
o 2 x KZ marine 6-ton furlers, 1 x 2-ton furler for BGS, 1 x 1-ton furler for spin staysail, all have head swivels.
Deck Gear
O 6 x Harken Air 300 winches.
o Swapped PTO driven to electric pumps for oil driven winches (2021).
o Swapper oil driven winches to all electric by Waypoint Racing (2025).
o On deck sheet tail bags (2021).
o Helm deck bar storage bags (2021).
o On deck 10 x drink water bottle holder at mainsail control station (2021).
o Custom water bottle holders at main brace.
Companionway hard sliding offshore hood (2021).

Extra boat gear
o Custom cradle with easy fold down tower.
o Low position for keel off and keel cradle.
o Centre point lift with shackle and lift strop.
o Straps for shipping.
o Custom hull shear pads for straps.
o 2 x Mast carts/ deck supports for mast.
o 2 x Boom deck cradle.
o Keel/Bulb lifting cap.
o Cradle chocks for both shipping and assembling.
Presentation

CONTACT DETAILS
Dealer
Race Yachts
Jason Rowed
Telephone
Address
Head Office - Peregian Beach QLD 4573 Australia
Sydney - Edgecliff NSW 2027 Australia
Sunshine Coast QLD Australia


CONTACT THE SELLER - Race Yachts
We take your privacy very seriously - your contact details are never shared!
MORE BOATS FROM RACE YACHTS